Victron Phoenix Inverter 48V/375VA/230V VE.Direct with Schuko Socket

High power from the very first moments of operation

This is very important if the inverter is to power devices such as converters powering high-power LED lamps, halogen lamps or power tools.

ECO mode

The inverter in ECO mode will switch to standby mode when the load drops below the programmed value. The device in standby mode will turn on regularly to monitor the level of power demand (by default, every 2.5 seconds). When the current consumption exceeds the programmed level, the inverter will remain on all the time.

Remote switch

The remote switch will make it easier to turn the inverter on and off depending on your needs - just connect it to the socket on the housing.

VE.Direct communication port

Can be connected to:

• Computer (VE.Direct – USB interface is necessary)
• Mobile devices operating in the iOS and Android environment (VE.Direct – Bluetooth Smart adapter required)

Allows you to fully configure the device:

• Alarm level for low battery voltage and alarm reset level
• Emergency shutdown level due to low battery level and inverter restart level
• Programmable smooth level of disconnection and reconnection depending on the inverter load
• Output voltage in the range of 210 – 245 V AC
• Output frequency – 50 – 60 Hz
• Enabling/disabling ECO mode and its configuration

Allows device monitoring:

• Control of incoming and outgoing current parameters
• Alarms related to fluctuations in these parameters, battery charge level and inverter load