Argo FET Battery Isolator - 200-2

Max Charge Current: 200A
Max Alternator Current: 200A
No of Batteries: 2
Argo FET Battery Isolator - 200-2

Part No: ARG200201020

 
Our Price: $221.00
 
 
Qty:
Seen it cheaper?
technical specVictron Energy Ask for more information quick code T57A
ARGO FET Battery Isolator
 
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. 
 
In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. 
 
When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section. 
 
When a current of 100 A flows through a cable of 50 mm† cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm† cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!